cpgIslandExt CpG Islands CpG Islands (Islands < 300 Bases are Light Green) Expression and Regulation Description CpG islands are associated with genes, particularly housekeeping genes, in vertebrates. CpG islands are typically common near transcription start sites and may be associated with promoter regions. Normally a C (cytosine) base followed immediately by a G (guanine) base (a CpG) is rare in vertebrate DNA because the Cs in such an arrangement tend to be methylated. This methylation helps distinguish the newly synthesized DNA strand from the parent strand, which aids in the final stages of DNA proofreading after duplication. However, over evolutionary time, methylated Cs tend to turn into Ts because of spontaneous deamination. The result is that CpGs are relatively rare unless there is selective pressure to keep them or a region is not methylated for some other reason, perhaps having to do with the regulation of gene expression. CpG islands are regions where CpGs are present at significantly higher levels than is typical for the genome as a whole. The unmasked version of the track displays potential CpG islands that exist in repeat regions and would otherwise not be visible in the repeat masked version. By default, only the masked version of the track is displayed. To view the unmasked version, change the visibility settings in the track controls at the top of this page. Methods CpG islands were predicted by searching the sequence one base at a time, scoring each dinucleotide (+17 for CG and -1 for others) and identifying maximally scoring segments. Each segment was then evaluated for the following criteria: GC content of 50% or greater length greater than 200 bp ratio greater than 0.6 of observed number of CG dinucleotides to the expected number on the basis of the number of Gs and Cs in the segment The entire genome sequence, masking areas included, was used for the construction of the track Unmasked CpG. The track CpG Islands is constructed on the sequence after all masked sequence is removed. The CpG count is the number of CG dinucleotides in the island. The Percentage CpG is the ratio of CpG nucleotide bases (twice the CpG count) to the length. The ratio of observed to expected CpG is calculated according to the formula (cited in Gardiner-Garden et al. (1987)): Obs/Exp CpG = Number of CpG * N / (Number of C * Number of G) where N = length of sequence. The calculation of the track data is performed by the following command sequence: twoBitToFa assembly.2bit stdout | maskOutFa stdin hard stdout \ | cpg_lh /dev/stdin 2&gt; cpg_lh.err \ | awk '{&dollar;2 = &dollar;2 - 1; width = &dollar;3 - &dollar;2; printf("%s\t%d\t%s\t%s %s\t%s\t%s\t%0.0f\t%0.1f\t%s\t%s\n", &dollar;1, &dollar;2, &dollar;3, &dollar;5, &dollar;6, width, &dollar;6, width*&dollar;7*0.01, 100.0*2*&dollar;6/width, &dollar;7, &dollar;9);}' \ | sort -k1,1 -k2,2n &gt; cpgIsland.bed The unmasked track data is constructed from twoBitToFa -noMask output for the twoBitToFa command. Data access CpG islands and its associated tables can be explored interactively using the REST API, the Table Browser or the Data Integrator. All the tables can also be queried directly from our public MySQL servers, with more information available on our help page as well as on our blog. The source for the cpg_lh program can be obtained from src/utils/cpgIslandExt/. The cpg_lh program binary can be obtained from: http://hgdownload.soe.ucsc.edu/admin/exe/linux.x86_64/cpg_lh (choose "save file") Credits This track was generated using a modification of a program developed by G. Miklem and L. Hillier (unpublished). References Gardiner-Garden M, Frommer M. CpG islands in vertebrate genomes. J Mol Biol. 1987 Jul 20;196(2):261-82. PMID: 3656447 
cpgIslandSuper CpG Islands CpG Islands (Islands < 300 Bases are Light Green) Expression and Regulation Description CpG islands are associated with genes, particularly housekeeping genes, in vertebrates. CpG islands are typically common near transcription start sites and may be associated with promoter regions. Normally a C (cytosine) base followed immediately by a G (guanine) base (a CpG) is rare in vertebrate DNA because the Cs in such an arrangement tend to be methylated. This methylation helps distinguish the newly synthesized DNA strand from the parent strand, which aids in the final stages of DNA proofreading after duplication. However, over evolutionary time, methylated Cs tend to turn into Ts because of spontaneous deamination. The result is that CpGs are relatively rare unless there is selective pressure to keep them or a region is not methylated for some other reason, perhaps having to do with the regulation of gene expression. CpG islands are regions where CpGs are present at significantly higher levels than is typical for the genome as a whole. The unmasked version of the track displays potential CpG islands that exist in repeat regions and would otherwise not be visible in the repeat masked version. By default, only the masked version of the track is displayed. To view the unmasked version, change the visibility settings in the track controls at the top of this page. Methods CpG islands were predicted by searching the sequence one base at a time, scoring each dinucleotide (+17 for CG and -1 for others) and identifying maximally scoring segments. Each segment was then evaluated for the following criteria: GC content of 50% or greater length greater than 200 bp ratio greater than 0.6 of observed number of CG dinucleotides to the expected number on the basis of the number of Gs and Cs in the segment The entire genome sequence, masking areas included, was used for the construction of the track Unmasked CpG. The track CpG Islands is constructed on the sequence after all masked sequence is removed. The CpG count is the number of CG dinucleotides in the island. The Percentage CpG is the ratio of CpG nucleotide bases (twice the CpG count) to the length. The ratio of observed to expected CpG is calculated according to the formula (cited in Gardiner-Garden et al. (1987)): Obs/Exp CpG = Number of CpG * N / (Number of C * Number of G) where N = length of sequence. The calculation of the track data is performed by the following command sequence: twoBitToFa assembly.2bit stdout | maskOutFa stdin hard stdout \ | cpg_lh /dev/stdin 2&gt; cpg_lh.err \ | awk '{&dollar;2 = &dollar;2 - 1; width = &dollar;3 - &dollar;2; printf("%s\t%d\t%s\t%s %s\t%s\t%s\t%0.0f\t%0.1f\t%s\t%s\n", &dollar;1, &dollar;2, &dollar;3, &dollar;5, &dollar;6, width, &dollar;6, width*&dollar;7*0.01, 100.0*2*&dollar;6/width, &dollar;7, &dollar;9);}' \ | sort -k1,1 -k2,2n &gt; cpgIsland.bed The unmasked track data is constructed from twoBitToFa -noMask output for the twoBitToFa command. Data access CpG islands and its associated tables can be explored interactively using the REST API, the Table Browser or the Data Integrator. All the tables can also be queried directly from our public MySQL servers, with more information available on our help page as well as on our blog. The source for the cpg_lh program can be obtained from src/utils/cpgIslandExt/. The cpg_lh program binary can be obtained from: http://hgdownload.soe.ucsc.edu/admin/exe/linux.x86_64/cpg_lh (choose "save file") Credits This track was generated using a modification of a program developed by G. Miklem and L. Hillier (unpublished). References Gardiner-Garden M, Frommer M. CpG islands in vertebrate genomes. J Mol Biol. 1987 Jul 20;196(2):261-82. PMID: 3656447 
rmsk RepeatMasker Repeating Elements by RepeatMasker Variation and Repeats Description This track was created by using Arian Smit's RepeatMasker program, which screens DNA sequences for interspersed repeats and low complexity DNA sequences. The program outputs a detailed annotation of the repeats that are present in the query sequence (represented by this track), as well as a modified version of the query sequence in which all the annotated repeats have been masked (generally available on the Downloads page). RepeatMasker uses the Repbase Update library of repeats from the Genetic Information Research Institute (GIRI). Repbase Update is described in Jurka (2000) in the References section below. Some newer assemblies have been made with Dfam, not Repbase. You can find the details for how we make our database data here in our &quot;makeDb/doc/&quot; directory. Display Conventions and Configuration In full display mode, this track displays up to ten different classes of repeats: Short interspersed nuclear elements (SINE), which include ALUs Long interspersed nuclear elements (LINE) Long terminal repeat elements (LTR), which include retroposons DNA repeat elements (DNA) Simple repeats (micro-satellites) Low complexity repeats Satellite repeats RNA repeats (including RNA, tRNA, rRNA, snRNA, scRNA, srpRNA) Other repeats, which includes class RC (Rolling Circle) Unknown The level of color shading in the graphical display reflects the amount of base mismatch, base deletion, and base insertion associated with a repeat element. The higher the combined number of these, the lighter the shading. A &quot;?&quot; at the end of the &quot;Family&quot; or &quot;Class&quot; (for example, DNA?) signifies that the curator was unsure of the classification. At some point in the future, either the &quot;?&quot; will be removed or the classification will be changed. Methods Data are generated using the RepeatMasker -s flag. Additional flags may be used for certain organisms. Repeats are soft-masked. Alignments may extend through repeats, but are not permitted to initiate in them. See the FAQ for more information. Credits Thanks to Arian Smit, Robert Hubley and GIRI for providing the tools and repeat libraries used to generate this track. References Smit AFA, Hubley R, Green P. RepeatMasker Open-3.0. http://www.repeatmasker.org. 1996-2010. Repbase Update is described in: Jurka J. Repbase Update: a database and an electronic journal of repetitive elements. Trends Genet. 2000 Sep;16(9):418-420. PMID: 10973072 For a discussion of repeats in mammalian genomes, see: Smit AF. Interspersed repeats and other mementos of transposable elements in mammalian genomes. Curr Opin Genet Dev. 1999 Dec;9(6):657-63. PMID: 10607616 Smit AF. The origin of interspersed repeats in the human genome. Curr Opin Genet Dev. 1996 Dec;6(6):743-8. PMID: 8994846 
refGene RefSeq Genes RefSeq Genes Genes and Gene Prediction Tracks Description The RefSeq Genes track shows known cow protein-coding and non-protein-coding genes taken from the NCBI RNA reference sequences collection (RefSeq). The data underlying this track are updated weekly. Please visit the Feedback for Gene and Reference Sequences (RefSeq) page to make suggestions, submit additions and corrections, or ask for help concerning RefSeq records. For more information on the different gene tracks, see our Genes FAQ. Display Conventions and Configuration This track follows the display conventions for gene prediction tracks. The color shading indicates the level of review the RefSeq record has undergone: predicted (light), provisional (medium), reviewed (dark). The item labels and display colors of features within this track can be configured through the controls at the top of the track description page. Label: By default, items are labeled by gene name. Click the appropriate Label option to display the accession name instead of the gene name, show both the gene and accession names, or turn off the label completely. Codon coloring: This track contains an optional codon coloring feature that allows users to quickly validate and compare gene predictions. To display codon colors, select the genomic codons option from the Color track by codons pull-down menu. For more information about this feature, go to the Coloring Gene Predictions and Annotations by Codon page. Hide non-coding genes: By default, both the protein-coding and non-protein-coding genes are displayed. If you wish to see only the coding genes, click this box. Methods RefSeq RNAs were aligned against the cow genome using BLAT. Those with an alignment of less than 15% were discarded. When a single RNA aligned in multiple places, the alignment having the highest base identity was identified. Only alignments having a base identity level within 0.1% of the best and at least 96% base identity with the genomic sequence were kept. Credits This track was produced at UCSC from RNA sequence data generated by scientists worldwide and curated by the NCBI RefSeq project. References Kent WJ. BLAT - the BLAST-like alignment tool. Genome Res. 2002 Apr;12(4):656-64. PMID: 11932250; PMC: PMC187518 Pruitt KD, Brown GR, Hiatt SM, Thibaud-Nissen F, Astashyn A, Ermolaeva O, Farrell CM, Hart J, Landrum MJ, McGarvey KM et al. RefSeq: an update on mammalian reference sequences. Nucleic Acids Res. 2014 Jan;42(Database issue):D756-63. PMID: 24259432; PMC: PMC3965018 Pruitt KD, Tatusova T, Maglott DR. NCBI Reference Sequence (RefSeq): a curated non-redundant sequence database of genomes, transcripts and proteins. Nucleic Acids Res. 2005 Jan 1;33(Database issue):D501-4. PMID: 15608248; PMC: PMC539979 
cpgIslandExtUnmasked Unmasked CpG CpG Islands on All Sequence (Islands < 300 Bases are Light Green) Expression and Regulation Description CpG islands are associated with genes, particularly housekeeping genes, in vertebrates. CpG islands are typically common near transcription start sites and may be associated with promoter regions. Normally a C (cytosine) base followed immediately by a G (guanine) base (a CpG) is rare in vertebrate DNA because the Cs in such an arrangement tend to be methylated. This methylation helps distinguish the newly synthesized DNA strand from the parent strand, which aids in the final stages of DNA proofreading after duplication. However, over evolutionary time, methylated Cs tend to turn into Ts because of spontaneous deamination. The result is that CpGs are relatively rare unless there is selective pressure to keep them or a region is not methylated for some other reason, perhaps having to do with the regulation of gene expression. CpG islands are regions where CpGs are present at significantly higher levels than is typical for the genome as a whole. The unmasked version of the track displays potential CpG islands that exist in repeat regions and would otherwise not be visible in the repeat masked version. By default, only the masked version of the track is displayed. To view the unmasked version, change the visibility settings in the track controls at the top of this page. Methods CpG islands were predicted by searching the sequence one base at a time, scoring each dinucleotide (+17 for CG and -1 for others) and identifying maximally scoring segments. Each segment was then evaluated for the following criteria: GC content of 50% or greater length greater than 200 bp ratio greater than 0.6 of observed number of CG dinucleotides to the expected number on the basis of the number of Gs and Cs in the segment The entire genome sequence, masking areas included, was used for the construction of the track Unmasked CpG. The track CpG Islands is constructed on the sequence after all masked sequence is removed. The CpG count is the number of CG dinucleotides in the island. The Percentage CpG is the ratio of CpG nucleotide bases (twice the CpG count) to the length. The ratio of observed to expected CpG is calculated according to the formula (cited in Gardiner-Garden et al. (1987)): Obs/Exp CpG = Number of CpG * N / (Number of C * Number of G) where N = length of sequence. The calculation of the track data is performed by the following command sequence: twoBitToFa assembly.2bit stdout | maskOutFa stdin hard stdout \ | cpg_lh /dev/stdin 2&gt; cpg_lh.err \ | awk '{&dollar;2 = &dollar;2 - 1; width = &dollar;3 - &dollar;2; printf("%s\t%d\t%s\t%s %s\t%s\t%s\t%0.0f\t%0.1f\t%s\t%s\n", &dollar;1, &dollar;2, &dollar;3, &dollar;5, &dollar;6, width, &dollar;6, width*&dollar;7*0.01, 100.0*2*&dollar;6/width, &dollar;7, &dollar;9);}' \ | sort -k1,1 -k2,2n &gt; cpgIsland.bed The unmasked track data is constructed from twoBitToFa -noMask output for the twoBitToFa command. Data access CpG islands and its associated tables can be explored interactively using the REST API, the Table Browser or the Data Integrator. All the tables can also be queried directly from our public MySQL servers, with more information available on our help page as well as on our blog. The source for the cpg_lh program can be obtained from src/utils/cpgIslandExt/. The cpg_lh program binary can be obtained from: http://hgdownload.soe.ucsc.edu/admin/exe/linux.x86_64/cpg_lh (choose "save file") Credits This track was generated using a modification of a program developed by G. Miklem and L. Hillier (unpublished). References Gardiner-Garden M, Frommer M. CpG islands in vertebrate genomes. J Mol Biol. 1987 Jul 20;196(2):261-82. PMID: 3656447 
transMapEnsemblV5 TransMap Ensembl TransMap Ensembl and GENCODE Mappings Version 5 Genes and Gene Prediction Tracks Description This track contains GENCODE or Ensembl alignments produced by the TransMap cross-species alignment algorithm from other vertebrate species in the UCSC Genome Browser. GENCODE is Ensembl for human and mouse, for other Ensembl sources, only ones with full gene builds are used. Projection Ensembl gene annotations will not be used as sources. For closer evolutionary distances, the alignments are created using syntenically filtered BLASTZ alignment chains, resulting in a prediction of the orthologous genes in cow. Display Conventions and Configuration This track follows the display conventions for PSL alignment tracks. This track may also be configured to display codon coloring, a feature that allows the user to quickly compare cDNAs against the genomic sequence. For more information about this option, click here. Several types of alignment gap may also be colored; for more information, click here. Methods Source transcript alignments were obtained from vertebrate organisms in the UCSC Genome Browser Database. BLAT alignments of RefSeq Genes, GenBank mRNAs, and GenBank Spliced ESTs to the cognate genome, along with UCSC Genes, were used as available. For all vertebrate assemblies that had BLASTZ alignment chains and nets to the cow (bosTau8) genome, a subset of the alignment chains were selected as follows: For organisms whose branch distance was no more than 0.5 (as computed by phyloFit, see Conservation track description for details), syntenic filtering was used. Reciprocal best nets were used if available; otherwise, nets were selected with the netfilter -syn command. The chains corresponding to the selected nets were used for mapping. For more distant species, where the determination of synteny is difficult, the full set of chains was used for mapping. This allows for more genes to map at the expense of some mapping to paralogous regions. The post-alignment filtering step removes some of the duplications. The pslMap program was used to do a base-level projection of the source transcript alignments via the selected chains to the cow genome, resulting in pairwise alignments of the source transcripts to the genome. The resulting alignments were filtered with pslCDnaFilter with a global near-best criteria of 0.5% in finished genomes (human and mouse) and 1.0% in other genomes. Alignments where less than 20% of the transcript mapped were discarded. To ensure unique identifiers for each alignment, cDNA and gene accessions were made unique by appending a suffix for each location in the source genome and again for each mapped location in the destination genome. The format is: accession.version-srcUniq.destUniq Where srcUniq is a number added to make each source alignment unique, and destUniq is added to give the subsequent TransMap alignments unique identifiers. For example, in the cow genome, there are two alignments of mRNA BC149621.1. These are assigned the identifiers BC149621.1-1 and BC149621.1-2. When these are mapped to the human genome, BC149621.1-1 maps to a single location and is given the identifier BC149621.1-1.1. However, BC149621.1-2 maps to two locations, resulting in BC149621.1-2.1 and BC149621.1-2.2. Note that multiple TransMap mappings are usually the result of tandem duplications, where both chains are identified as syntenic. Data Access The raw data for these tracks can be accessed interactively through the Table Browser or the Data Integrator. For automated analysis, the annotations are stored in bigPsl files (containing a number of extra columns) and can be downloaded from our download server, or queried using our API. For more information on accessing track data see our Track Data Access FAQ. The files are associated with these tracks in the following way: TransMap Ensembl - bosTau8.ensembl.transMapV4.bigPsl TransMap RefGene - bosTau8.refseq.transMapV4.bigPsl TransMap RNA - bosTau8.rna.transMapV4.bigPsl TransMap ESTs - bosTau8.est.transMapV4.bigPsl Individual regions or the whole genome annotation can be obtained using our tool bigBedToBed which can be compiled from the source code or downloaded as a precompiled binary for your system. Instructions for downloading source code and binaries can be found here. The tool can also be used to obtain only features within a given range, for example: bigBedToBed http://hgdownload.soe.ucsc.edu/gbdb/bosTau8/transMap/V4/bosTau8.refseq.transMapV4.bigPsl -chrom=chr6 -start=0 -end=1000000 stdout Credits This track was produced by Mark Diekhans at UCSC from cDNA and EST sequence data submitted to the international public sequence databases by scientists worldwide and annotations produced by the RefSeq, Ensembl, and GENCODE annotations projects. References Siepel A, Diekhans M, Brejov&#225; B, Langton L, Stevens M, Comstock CL, Davis C, Ewing B, Oommen S, Lau C et al. Targeted discovery of novel human exons by comparative genomics. Genome Res. 2007 Dec;17(12):1763-73. PMID: 17989246; PMC: PMC2099585 Stanke M, Diekhans M, Baertsch R, Haussler D. Using native and syntenically mapped cDNA alignments to improve de novo gene finding. Bioinformatics. 2008 Mar 1;24(5):637-44. PMID: 18218656 Zhu J, Sanborn JZ, Diekhans M, Lowe CB, Pringle TH, Haussler D. Comparative genomics search for losses of long-established genes on the human lineage. PLoS Comput Biol. 2007 Dec;3(12):e247. PMID: 18085818; PMC: PMC2134963 
transMapV5 TransMap V5 TransMap Alignments Version 5 Genes and Gene Prediction Tracks Description These tracks contain cDNA and gene alignments produced by the TransMap cross-species alignment algorithm from other vertebrate species in the UCSC Genome Browser. For closer evolutionary distances, the alignments are created using syntenically filtered LASTZ or BLASTZ alignment chains, resulting in a prediction of the orthologous genes in cow. For more distant organisms, reciprocal best alignments are used. TransMap maps genes and related annotations in one species to another using synteny-filtered pairwise genome alignments (chains and nets) to determine the most likely orthologs. For example, for the mRNA TransMap track on the human assembly, more than 400,000 mRNAs from 25 vertebrate species were aligned at high stringency to the native assembly using BLAT. The alignments were then mapped to the human assembly using the chain and net alignments produced using BLASTZ, which has higher sensitivity than BLAT for diverged organisms. Compared to translated BLAT, TransMap finds fewer paralogs and aligns more UTR bases. Display Conventions and Configuration This track follows the display conventions for PSL alignment tracks. This track may also be configured to display codon coloring, a feature that allows the user to quickly compare cDNAs against the genomic sequence. For more information about this option, click here. Several types of alignment gap may also be colored; for more information, click here. Methods Source transcript alignments were obtained from vertebrate organisms in the UCSC Genome Browser Database. BLAT alignments of RefSeq Genes, GenBank mRNAs, and GenBank Spliced ESTs to the cognate genome, along with UCSC Genes, were used as available. For all vertebrate assemblies that had BLASTZ alignment chains and nets to the cow (bosTau8) genome, a subset of the alignment chains were selected as follows: For organisms whose branch distance was no more than 0.5 (as computed by phyloFit, see Conservation track description for details), syntenic filtering was used. Reciprocal best nets were used if available; otherwise, nets were selected with the netfilter -syn command. The chains corresponding to the selected nets were used for mapping. For more distant species, where the determination of synteny is difficult, the full set of chains was used for mapping. This allows for more genes to map at the expense of some mapping to paralogous regions. The post-alignment filtering step removes some of the duplications. The pslMap program was used to do a base-level projection of the source transcript alignments via the selected chains to the cow genome, resulting in pairwise alignments of the source transcripts to the genome. The resulting alignments were filtered with pslCDnaFilter with a global near-best criteria of 0.5% in finished genomes (human and mouse) and 1.0% in other genomes. Alignments where less than 20% of the transcript mapped were discarded. To ensure unique identifiers for each alignment, cDNA and gene accessions were made unique by appending a suffix for each location in the source genome and again for each mapped location in the destination genome. The format is: accession.version-srcUniq.destUniq Where srcUniq is a number added to make each source alignment unique, and destUniq is added to give the subsequent TransMap alignments unique identifiers. For example, in the cow genome, there are two alignments of mRNA BC149621.1. These are assigned the identifiers BC149621.1-1 and BC149621.1-2. When these are mapped to the human genome, BC149621.1-1 maps to a single location and is given the identifier BC149621.1-1.1. However, BC149621.1-2 maps to two locations, resulting in BC149621.1-2.1 and BC149621.1-2.2. Note that multiple TransMap mappings are usually the result of tandem duplications, where both chains are identified as syntenic. Data Access The raw data for these tracks can be accessed interactively through the Table Browser or the Data Integrator. For automated analysis, the annotations are stored in bigPsl files (containing a number of extra columns) and can be downloaded from our download server, or queried using our API. For more information on accessing track data see our Track Data Access FAQ. The files are associated with these tracks in the following way: TransMap Ensembl - bosTau8.ensembl.transMapV5.bigPsl TransMap RefGene - bosTau8.refseq.transMapV5.bigPsl TransMap RNA - bosTau8.rna.transMapV5.bigPsl TransMap ESTs - bosTau8.est.transMapV5.bigPsl Individual regions or the whole genome annotation can be obtained using our tool bigBedToBed, which can be compiled from the source code or downloaded as a precompiled binary for your system. Instructions for downloading source code and binaries can be found here. The tool can also be used to obtain only features within a given range, for example: bigBedToBed http://hgdownload.soe.ucsc.edu/gbdb/bosTau8/transMap/V5/bosTau8.refseq.transMapV5.bigPsl -chrom=chr6 -start=0 -end=1000000 stdout Credits This track was produced by Mark Diekhans at UCSC from cDNA and EST sequence data submitted to the international public sequence databases by scientists worldwide and annotations produced by the RefSeq, Ensembl, and GENCODE annotations projects. References Siepel A, Diekhans M, Brejov&#225; B, Langton L, Stevens M, Comstock CL, Davis C, Ewing B, Oommen S, Lau C et al. Targeted discovery of novel human exons by comparative genomics. Genome Res. 2007 Dec;17(12):1763-73. PMID: 17989246; PMC: PMC2099585 Stanke M, Diekhans M, Baertsch R, Haussler D. Using native and syntenically mapped cDNA alignments to improve de novo gene finding. Bioinformatics. 2008 Mar 1;24(5):637-44. PMID: 18218656 Zhu J, Sanborn JZ, Diekhans M, Lowe CB, Pringle TH, Haussler D. Comparative genomics search for losses of long-established genes on the human lineage. PLoS Comput Biol. 2007 Dec;3(12):e247. PMID: 18085818; PMC: PMC2134963 
transMapRefSeqV5 TransMap RefGene TransMap RefSeq Gene Mappings Version 5 Genes and Gene Prediction Tracks Description This track contains RefSeq Gene alignments produced by the TransMap cross-species alignment algorithm from other vertebrate species in the UCSC Genome Browser. For closer evolutionary distances, the alignments are created using syntenically filtered BLASTZ alignment chains, resulting in a prediction of the orthologous genes in cow. Display Conventions and Configuration This track follows the display conventions for PSL alignment tracks. This track may also be configured to display codon coloring, a feature that allows the user to quickly compare cDNAs against the genomic sequence. For more information about this option, click here. Several types of alignment gap may also be colored; for more information, click here. Methods Source transcript alignments were obtained from vertebrate organisms in the UCSC Genome Browser Database. BLAT alignments of RefSeq Genes, GenBank mRNAs, and GenBank Spliced ESTs to the cognate genome, along with UCSC Genes, were used as available. For all vertebrate assemblies that had BLASTZ alignment chains and nets to the cow (bosTau8) genome, a subset of the alignment chains were selected as follows: For organisms whose branch distance was no more than 0.5 (as computed by phyloFit, see Conservation track description for details), syntenic filtering was used. Reciprocal best nets were used if available; otherwise, nets were selected with the netfilter -syn command. The chains corresponding to the selected nets were used for mapping. For more distant species, where the determination of synteny is difficult, the full set of chains was used for mapping. This allows for more genes to map at the expense of some mapping to paralogous regions. The post-alignment filtering step removes some of the duplications. The pslMap program was used to do a base-level projection of the source transcript alignments via the selected chains to the cow genome, resulting in pairwise alignments of the source transcripts to the genome. The resulting alignments were filtered with pslCDnaFilter with a global near-best criteria of 0.5% in finished genomes (human and mouse) and 1.0% in other genomes. Alignments where less than 20% of the transcript mapped were discarded. To ensure unique identifiers for each alignment, cDNA and gene accessions were made unique by appending a suffix for each location in the source genome and again for each mapped location in the destination genome. The format is: accession.version-srcUniq.destUniq Where srcUniq is a number added to make each source alignment unique, and destUniq is added to give the subsequent TransMap alignments unique identifiers. For example, in the cow genome, there are two alignments of mRNA BC149621.1. These are assigned the identifiers BC149621.1-1 and BC149621.1-2. When these are mapped to the human genome, BC149621.1-1 maps to a single location and is given the identifier BC149621.1-1.1. However, BC149621.1-2 maps to two locations, resulting in BC149621.1-2.1 and BC149621.1-2.2. Note that multiple TransMap mappings are usually the result of tandem duplications, where both chains are identified as syntenic. Data Access The raw data for these tracks can be accessed interactively through the Table Browser or the Data Integrator. For automated analysis, the annotations are stored in bigPsl files (containing a number of extra columns) and can be downloaded from our download server, or queried using our API. For more information on accessing track data see our Track Data Access FAQ. The files are associated with these tracks in the following way: TransMap Ensembl - bosTau8.ensembl.transMapV4.bigPsl TransMap RefGene - bosTau8.refseq.transMapV4.bigPsl TransMap RNA - bosTau8.rna.transMapV4.bigPsl TransMap ESTs - bosTau8.est.transMapV4.bigPsl Individual regions or the whole genome annotation can be obtained using our tool bigBedToBed which can be compiled from the source code or downloaded as a precompiled binary for your system. Instructions for downloading source code and binaries can be found here. The tool can also be used to obtain only features within a given range, for example: bigBedToBed http://hgdownload.soe.ucsc.edu/gbdb/bosTau8/transMap/V4/bosTau8.refseq.transMapV4.bigPsl -chrom=chr6 -start=0 -end=1000000 stdout Credits This track was produced by Mark Diekhans at UCSC from cDNA and EST sequence data submitted to the international public sequence databases by scientists worldwide and annotations produced by the RefSeq, Ensembl, and GENCODE annotations projects. References Siepel A, Diekhans M, Brejov&#225; B, Langton L, Stevens M, Comstock CL, Davis C, Ewing B, Oommen S, Lau C et al. Targeted discovery of novel human exons by comparative genomics. Genome Res. 2007 Dec;17(12):1763-73. PMID: 17989246; PMC: PMC2099585 Stanke M, Diekhans M, Baertsch R, Haussler D. Using native and syntenically mapped cDNA alignments to improve de novo gene finding. Bioinformatics. 2008 Mar 1;24(5):637-44. PMID: 18218656 Zhu J, Sanborn JZ, Diekhans M, Lowe CB, Pringle TH, Haussler D. Comparative genomics search for losses of long-established genes on the human lineage. PLoS Comput Biol. 2007 Dec;3(12):e247. PMID: 18085818; PMC: PMC2134963 
transMapRnaV5 TransMap RNA TransMap GenBank RNA Mappings Version 5 Genes and Gene Prediction Tracks Description This track contains GenBank mRNA alignments produced by the TransMap cross-species alignment algorithm from other vertebrate species in the UCSC Genome Browser. For closer evolutionary distances, the alignments are created using syntenically filtered BLASTZ alignment chains, resulting in a prediction of the orthologous genes in cow. Display Conventions and Configuration This track follows the display conventions for PSL alignment tracks. This track may also be configured to display codon coloring, a feature that allows the user to quickly compare cDNAs against the genomic sequence. For more information about this option, click here. Several types of alignment gap may also be colored; for more information, click here. Methods Source transcript alignments were obtained from vertebrate organisms in the UCSC Genome Browser Database. BLAT alignments of RefSeq Genes, GenBank mRNAs, and GenBank Spliced ESTs to the cognate genome, along with UCSC Genes, were used as available. For all vertebrate assemblies that had BLASTZ alignment chains and nets to the cow (bosTau8) genome, a subset of the alignment chains were selected as follows: For organisms whose branch distance was no more than 0.5 (as computed by phyloFit, see Conservation track description for details), syntenic filtering was used. Reciprocal best nets were used if available; otherwise, nets were selected with the netfilter -syn command. The chains corresponding to the selected nets were used for mapping. For more distant species, where the determination of synteny is difficult, the full set of chains was used for mapping. This allows for more genes to map at the expense of some mapping to paralogous regions. The post-alignment filtering step removes some of the duplications. The pslMap program was used to do a base-level projection of the source transcript alignments via the selected chains to the cow genome, resulting in pairwise alignments of the source transcripts to the genome. The resulting alignments were filtered with pslCDnaFilter with a global near-best criteria of 0.5% in finished genomes (human and mouse) and 1.0% in other genomes. Alignments where less than 20% of the transcript mapped were discarded. To ensure unique identifiers for each alignment, cDNA and gene accessions were made unique by appending a suffix for each location in the source genome and again for each mapped location in the destination genome. The format is: accession.version-srcUniq.destUniq Where srcUniq is a number added to make each source alignment unique, and destUniq is added to give the subsequent TransMap alignments unique identifiers. For example, in the cow genome, there are two alignments of mRNA BC149621.1. These are assigned the identifiers BC149621.1-1 and BC149621.1-2. When these are mapped to the human genome, BC149621.1-1 maps to a single location and is given the identifier BC149621.1-1.1. However, BC149621.1-2 maps to two locations, resulting in BC149621.1-2.1 and BC149621.1-2.2. Note that multiple TransMap mappings are usually the result of tandem duplications, where both chains are identified as syntenic. Data Access The raw data for these tracks can be accessed interactively through the Table Browser or the Data Integrator. For automated analysis, the annotations are stored in bigPsl files (containing a number of extra columns) and can be downloaded from our download server, or queried using our API. For more information on accessing track data see our Track Data Access FAQ. The files are associated with these tracks in the following way: TransMap Ensembl - bosTau8.ensembl.transMapV4.bigPsl TransMap RefGene - bosTau8.refseq.transMapV4.bigPsl TransMap RNA - bosTau8.rna.transMapV4.bigPsl TransMap ESTs - bosTau8.est.transMapV4.bigPsl Individual regions or the whole genome annotation can be obtained using our tool bigBedToBed which can be compiled from the source code or downloaded as a precompiled binary for your system. Instructions for downloading source code and binaries can be found here. The tool can also be used to obtain only features within a given range, for example: bigBedToBed http://hgdownload.soe.ucsc.edu/gbdb/bosTau8/transMap/V4/bosTau8.refseq.transMapV4.bigPsl -chrom=chr6 -start=0 -end=1000000 stdout Credits This track was produced by Mark Diekhans at UCSC from cDNA and EST sequence data submitted to the international public sequence databases by scientists worldwide and annotations produced by the RefSeq, Ensembl, and GENCODE annotations projects. References Siepel A, Diekhans M, Brejov&#225; B, Langton L, Stevens M, Comstock CL, Davis C, Ewing B, Oommen S, Lau C et al. Targeted discovery of novel human exons by comparative genomics. Genome Res. 2007 Dec;17(12):1763-73. PMID: 17989246; PMC: PMC2099585 Stanke M, Diekhans M, Baertsch R, Haussler D. Using native and syntenically mapped cDNA alignments to improve de novo gene finding. Bioinformatics. 2008 Mar 1;24(5):637-44. PMID: 18218656 Zhu J, Sanborn JZ, Diekhans M, Lowe CB, Pringle TH, Haussler D. Comparative genomics search for losses of long-established genes on the human lineage. PLoS Comput Biol. 2007 Dec;3(12):e247. PMID: 18085818; PMC: PMC2134963 
transMapEstV5 TransMap ESTs TransMap EST Mappings Version 5 Genes and Gene Prediction Tracks Description This track contains GenBank spliced EST alignments produced by the TransMap cross-species alignment algorithm from other vertebrate species in the UCSC Genome Browser. For closer evolutionary distances, the alignments are created using syntenically filtered BLASTZ alignment chains, resulting in a prediction of the orthologous genes in cow. Display Conventions and Configuration This track follows the display conventions for PSL alignment tracks. This track may also be configured to display codon coloring, a feature that allows the user to quickly compare cDNAs against the genomic sequence. For more information about this option, click here. Several types of alignment gap may also be colored; for more information, click here. Methods Source transcript alignments were obtained from vertebrate organisms in the UCSC Genome Browser Database. BLAT alignments of RefSeq Genes, GenBank mRNAs, and GenBank Spliced ESTs to the cognate genome, along with UCSC Genes, were used as available. For all vertebrate assemblies that had BLASTZ alignment chains and nets to the cow (bosTau8) genome, a subset of the alignment chains were selected as follows: For organisms whose branch distance was no more than 0.5 (as computed by phyloFit, see Conservation track description for details), syntenic filtering was used. Reciprocal best nets were used if available; otherwise, nets were selected with the netfilter -syn command. The chains corresponding to the selected nets were used for mapping. For more distant species, where the determination of synteny is difficult, the full set of chains was used for mapping. This allows for more genes to map at the expense of some mapping to paralogous regions. The post-alignment filtering step removes some of the duplications. The pslMap program was used to do a base-level projection of the source transcript alignments via the selected chains to the cow genome, resulting in pairwise alignments of the source transcripts to the genome. The resulting alignments were filtered with pslCDnaFilter with a global near-best criteria of 0.5% in finished genomes (human and mouse) and 1.0% in other genomes. Alignments where less than 20% of the transcript mapped were discarded. To ensure unique identifiers for each alignment, cDNA and gene accessions were made unique by appending a suffix for each location in the source genome and again for each mapped location in the destination genome. The format is: accession.version-srcUniq.destUniq Where srcUniq is a number added to make each source alignment unique, and destUniq is added to give the subsequent TransMap alignments unique identifiers. For example, in the cow genome, there are two alignments of mRNA BC149621.1. These are assigned the identifiers BC149621.1-1 and BC149621.1-2. When these are mapped to the human genome, BC149621.1-1 maps to a single location and is given the identifier BC149621.1-1.1. However, BC149621.1-2 maps to two locations, resulting in BC149621.1-2.1 and BC149621.1-2.2. Note that multiple TransMap mappings are usually the result of tandem duplications, where both chains are identified as syntenic. Data Access The raw data for these tracks can be accessed interactively through the Table Browser or the Data Integrator. For automated analysis, the annotations are stored in bigPsl files (containing a number of extra columns) and can be downloaded from our download server, or queried using our API. For more information on accessing track data see our Track Data Access FAQ. The files are associated with these tracks in the following way: TransMap Ensembl - bosTau8.ensembl.transMapV4.bigPsl TransMap RefGene - bosTau8.refseq.transMapV4.bigPsl TransMap RNA - bosTau8.rna.transMapV4.bigPsl TransMap ESTs - bosTau8.est.transMapV4.bigPsl Individual regions or the whole genome annotation can be obtained using our tool bigBedToBed which can be compiled from the source code or downloaded as a precompiled binary for your system. Instructions for downloading source code and binaries can be found here. The tool can also be used to obtain only features within a given range, for example: bigBedToBed http://hgdownload.soe.ucsc.edu/gbdb/bosTau8/transMap/V4/bosTau8.refseq.transMapV4.bigPsl -chrom=chr6 -start=0 -end=1000000 stdout Credits This track was produced by Mark Diekhans at UCSC from cDNA and EST sequence data submitted to the international public sequence databases by scientists worldwide and annotations produced by the RefSeq, Ensembl, and GENCODE annotations projects. References Siepel A, Diekhans M, Brejov&#225; B, Langton L, Stevens M, Comstock CL, Davis C, Ewing B, Oommen S, Lau C et al. Targeted discovery of novel human exons by comparative genomics. Genome Res. 2007 Dec;17(12):1763-73. PMID: 17989246; PMC: PMC2099585 Stanke M, Diekhans M, Baertsch R, Haussler D. Using native and syntenically mapped cDNA alignments to improve de novo gene finding. Bioinformatics. 2008 Mar 1;24(5):637-44. PMID: 18218656 Zhu J, Sanborn JZ, Diekhans M, Lowe CB, Pringle TH, Haussler D. Comparative genomics search for losses of long-established genes on the human lineage. PLoS Comput Biol. 2007 Dec;3(12):e247. PMID: 18085818; PMC: PMC2134963 
snp148 All SNPs(148) Simple Nucleotide Polymorphisms (dbSNP 148) Variation and Repeats Description This track contains information about single nucleotide polymorphisms and small insertions and deletions (indels) &mdash; collectively Simple Nucleotide Polymorphisms &mdash; from dbSNP build 148, available from ftp.ncbi.nih.gov/snp. A subset of the items in this track are contained in Mult. SNPs(148), which are SNPs that have been mapped to multiple locations in the reference genome assembly. The default maximum weight for this track is 1, so unless the setting is changed in the track controls, SNPs that map to multiple genomic locations will be omitted from display. When a SNP's flanking sequences map to multiple locations in the reference genome, it calls into question whether there is true variation at those sites, or whether the sequences at those sites are merely highly similar but not identical. Interpreting and Configuring the Graphical Display Variants are shown as single tick marks at most zoom levels. When viewing the track at or near base-level resolution, the displayed width of the SNP corresponds to the width of the variant in the reference sequence. Insertions are indicated by a single tick mark displayed between two nucleotides, single nucleotide polymorphisms are displayed as the width of a single base, and multiple nucleotide variants are represented by a block that spans two or more bases. On the track controls page, SNPs can be colored and/or filtered from the display according to several attributes: Class: Describes the observed alleles Single - single nucleotide variation: all observed alleles are single nucleotides (can have 2, 3 or 4 alleles) In-del - insertion/deletion Heterozygous - heterozygous (undetermined) variation: allele contains string '(heterozygous)' Microsatellite - the observed allele from dbSNP is a variation in counts of short tandem repeats Named - the observed allele from dbSNP is given as a text name instead of raw sequence, e.g., (Alu)/- No Variation - the submission reports an invariant region in the surveyed sequence Mixed - the cluster contains submissions from multiple classes Multiple Nucleotide Polymorphism (MNP) - the alleles are all of the same length, and length &gt; 1 Insertion - the polymorphism is an insertion relative to the reference assembly Deletion - the polymorphism is a deletion relative to the reference assembly Unknown - no classification provided by data contributor Validation: Method used to validate the variant (each variant may be validated by more than one method) By Frequency - at least one submitted SNP in cluster has frequency data submitted By Cluster - cluster has at least 2 submissions, with at least one submission assayed with a non-computational method Unknown - no validation has been reported for this variant Function: dbSNP's predicted functional effect of variant on RefSeq transcripts, both curated (NM_* and NR_*) as in the RefSeq Genes track and predicted (XM_* and XR_*), not shown in UCSC Genome Browser. A variant may have more than one functional role if it overlaps multiple transcripts. These terms and definitions are from the Sequence Ontology (SO); click on a term to view it in the MISO Sequence Ontology Browser. Unknown - no functional classification provided (possibly intergenic) synonymous_variant - A sequence variant where there is no resulting change to the encoded amino acid (dbSNP term: coding-synon) intron_variant - A transcript variant occurring within an intron (dbSNP term: intron) downstream_gene_variant - A sequence variant located 3' of a gene (dbSNP term: near-gene-3) upstream_gene_variant - A sequence variant located 5' of a gene (dbSNP term: near-gene-5) nc_transcript_variant - A transcript variant of a non coding RNA gene (dbSNP term: ncRNA) stop_gained - A sequence variant whereby at least one base of a codon is changed, resulting in a premature stop codon, leading to a shortened transcript (dbSNP term: nonsense) missense_variant - A sequence variant, where the change may be longer than 3 bases, and at least one base of a codon is changed resulting in a codon that encodes for a different amino acid (dbSNP term: missense) stop_lost - A sequence variant where at least one base of the terminator codon (stop) is changed, resulting in an elongated transcript (dbSNP term: stop-loss) frameshift_variant - A sequence variant which causes a disruption of the translational reading frame, because the number of nucleotides inserted or deleted is not a multiple of three (dbSNP term: frameshift) inframe_indel - A coding sequence variant where the change does not alter the frame of the transcript (dbSNP term: cds-indel) 3_prime_UTR_variant - A UTR variant of the 3' UTR (dbSNP term: untranslated-3) 5_prime_UTR_variant - A UTR variant of the 5' UTR (dbSNP term: untranslated-5) splice_acceptor_variant - A splice variant that changes the 2 base region at the 3' end of an intron (dbSNP term: splice-3) splice_donor_variant - A splice variant that changes the 2 base region at the 5' end of an intron (dbSNP term: splice-5) In the Coloring Options section of the track controls page, function terms are grouped into several categories, shown here with default colors: Locus: downstream_gene_variant, upstream_gene_variant Coding - Synonymous: synonymous_variant Coding - Non-Synonymous: stop_gained, missense_variant, stop_lost, frameshift_variant, inframe_indel Untranslated: 5_prime_UTR_variant, 3_prime_UTR_variant Intron: intron_variant Splice Site: splice_acceptor_variant, splice_donor_variant Molecule Type: Sample used to find this variant Genomic - variant discovered using a genomic template cDNA - variant discovered using a cDNA template Unknown - sample type not known Unusual Conditions (UCSC): UCSC checks for several anomalies that may indicate a problem with the mapping, and reports them in the Annotations section of the SNP details page if found: AlleleFreqSumNot1 - Allele frequencies do not sum to 1.0 (+-0.01). This SNP's allele frequency data are probably incomplete. DuplicateObserved, MixedObserved - Multiple distinct insertion SNPs have been mapped to this location, with either the same inserted sequence (Duplicate) or different inserted sequence (Mixed). FlankMismatchGenomeEqual, FlankMismatchGenomeLonger, FlankMismatchGenomeShorter - NCBI's alignment of the flanking sequences had at least one mismatch or gap near the mapped SNP position. (UCSC's re-alignment of flanking sequences to the genome may be informative.) MultipleAlignments - This SNP's flanking sequences align to more than one location in the reference assembly. NamedDeletionZeroSpan - A deletion (from the genome) was observed but the annotation spans 0 bases. (UCSC's re-alignment of flanking sequences to the genome may be informative.) NamedInsertionNonzeroSpan - An insertion (into the genome) was observed but the annotation spans more than 0 bases. (UCSC's re-alignment of flanking sequences to the genome may be informative.) NonIntegerChromCount - At least one allele frequency corresponds to a non-integer (+-0.010000) count of chromosomes on which the allele was observed. The reported total sample count for this SNP is probably incorrect. ObservedContainsIupac - At least one observed allele from dbSNP contains an IUPAC ambiguous base (e.g., R, Y, N). ObservedMismatch - UCSC reference allele does not match any observed allele from dbSNP. This is tested only for SNPs whose class is single, in-del, insertion, deletion, mnp or mixed. ObservedTooLong - Observed allele not given (length too long). ObservedWrongFormat - Observed allele(s) from dbSNP have unexpected format for the given class. RefAlleleMismatch - The reference allele from dbSNP does not match the UCSC reference allele, i.e., the bases in the mapped position range. RefAlleleRevComp - The reference allele from dbSNP matches the reverse complement of the UCSC reference allele. SingleClassLongerSpan - All observed alleles are single-base, but the annotation spans more than 1 base. (UCSC's re-alignment of flanking sequences to the genome may be informative.) SingleClassZeroSpan - All observed alleles are single-base, but the annotation spans 0 bases. (UCSC's re-alignment of flanking sequences to the genome may be informative.) Another condition, which does not necessarily imply any problem, is noted: SingleClassTriAllelic, SingleClassQuadAllelic - Class is single and three or four different bases have been observed (usually there are only two). Miscellaneous Attributes (dbSNP): several properties extracted from dbSNP's SNP_bitfield table (see dbSNP_BitField_v5.pdf for details) Clinically Associated (human only) - SNP is in OMIM and/or at least one submitter is a Locus-Specific Database. This does not necessarily imply that the variant causes any disease, only that it has been observed in clinical studies. Appears in OMIM/OMIA - SNP is mentioned in Online Mendelian Inheritance in Man for human SNPs, or Online Mendelian Inheritance in Animals for non-human animal SNPs. Some of these SNPs are quite common, others are known to cause disease; see OMIM/OMIA for more information. Has Microattribution/Third-Party Annotation - At least one of the SNP's submitters studied this SNP in a biomedical setting, but is not a Locus-Specific Database or OMIM/OMIA. Submitted by Locus-Specific Database - At least one of the SNP's submitters is associated with a database of variants associated with a particular gene. These variants may or may not be known to be causative. MAF &gt;= 5% in Some Population - Minor Allele Frequency is at least 5% in at least one population assayed. MAF &gt;= 5% in All Populations - Minor Allele Frequency is at least 5% in all populations assayed. Genotype Conflict - Quality check: different genotypes have been submitted for the same individual. Ref SNP Cluster has Non-overlapping Alleles - Quality check: this reference SNP was clustered from submitted SNPs with non-overlapping sets of observed alleles. Some Assembly's Allele Does Not Match Observed - Quality check: at least one assembly mapped by dbSNP has an allele at the mapped position that is not present in this SNP's observed alleles. Several other properties do not have coloring options, but do have some filtering options: Average heterozygosity: Calculated by dbSNP as described in Computation of Average Heterozygosity and Standard Error for dbSNP RefSNP Clusters. Average heterozygosity should not exceed 0.5 for bi-allelic single-base substitutions. Weight: Alignment quality assigned by dbSNP Weight can be 0, 1, 2, 3 or 10. Weight = 1 are the highest quality alignments. Weight = 0 and weight = 10 are excluded from the data set. A filter on maximum weight value is supported, which defaults to 1 on all tracks except the Mult. SNPs track, which defaults to 3. Submitter handles: These are short, single-word identifiers of labs or consortia that submitted SNPs that were clustered into this reference SNP by dbSNP (e.g., 1000GENOMES, ENSEMBL, KWOK). Some SNPs have been observed by many different submitters, and some by only a single submitter (although that single submitter may have tested a large number of samples). AlleleFrequencies: Some submissions to dbSNP include allele frequencies and the study's sample size (i.e., the number of distinct chromosomes, which is two times the number of individuals assayed, a.k.a. 2N). dbSNP combines all available frequencies and counts from submitted SNPs that are clustered together into a reference SNP. You can configure this track such that the details page displays the function and coding differences relative to particular gene sets. Choose the gene sets from the list on the SNP configuration page displayed beneath this heading: On details page, show function and coding differences relative to. When one or more gene tracks are selected, the SNP details page lists all genes that the SNP hits (or is close to), with the same keywords used in the function category. The function usually agrees with NCBI's function, except when NCBI's functional annotation is relative to an XM_* predicted RefSeq (not included in the UCSC Genome Browser's RefSeq Genes track) and/or UCSC's functional annotation is relative to a transcript that is not in RefSeq. Insertions/Deletions dbSNP uses a class called 'in-del'. We compare the length of the reference allele to the length(s) of observed alleles; if the reference allele is shorter than all other observed alleles, we change 'in-del' to 'insertion'. Likewise, if the reference allele is longer than all other observed alleles, we change 'in-del' to 'deletion'. UCSC Re-alignment of flanking sequences dbSNP determines the genomic locations of SNPs by aligning their flanking sequences to the genome. UCSC displays SNPs in the locations determined by dbSNP, but does not have access to the alignments on which dbSNP based its mappings. Instead, UCSC re-aligns the flanking sequences to the neighboring genomic sequence for display on SNP details pages. While the recomputed alignments may differ from dbSNP's alignments, they often are informative when UCSC has annotated an unusual condition. Non-repetitive genomic sequence is shown in upper case like the flanking sequence, and a &quot;|&quot; indicates each match between genomic and flanking bases. Repetitive genomic sequence (annotated by RepeatMasker and/or the Tandem Repeats Finder with period &gt;= 12) is shown in lower case, and matching bases are indicated by a &quot;+&quot;. Data Sources and Methods The data that comprise this track were extracted from database dump files and headers of fasta files downloaded from NCBI. The database dump files were downloaded from ftp://ftp.ncbi.nlm.nih.gov/snp/organisms/cow_9913/database/organism_data/ for bosTau8. The fasta files were downloaded from ftp://ftp.ncbi.nlm.nih.gov/snp/organisms/cow_9913/rs_fasta/ for bosTau8. Coordinates, orientation, location type and dbSNP reference allele data were obtained from b148_SNPContigLoc.bcp.gz and b148_ContigInfo.bcp.gz. b148_SNPMapInfo.bcp.gz provided the alignment weights. Functional classification was obtained from b148_SNPContigLocusId.bcp.gz. The internal database representation uses dbSNP's function terms, but for display in SNP details pages, these are translated into Sequence Ontology terms. Validation status and heterozygosity were obtained from SNP.bcp.gz. SNPAlleleFreq.bcp.gz and ../shared/Allele.bcp.gz provided allele frequencies. For the human assembly, allele frequencies were also taken from SNPAlleleFreq_TGP.bcp.gz . Submitter handles were extracted from Batch.bcp.gz, SubSNP.bcp.gz and SNPSubSNPLink.bcp.gz. SNP_bitfield.bcp.gz provided miscellaneous properties annotated by dbSNP, such as clinically-associated. See the document dbSNP_BitField_v5.pdf for details. The header lines in the rs_fasta files were used for molecule type, class and observed polymorphism. Data Access The raw data can be explored interactively with the Table Browser, Data Integrator, or Variant Annotation Integrator. For automated analysis, the genome annotation can be downloaded from the downloads server (snp148*.txt.gz) or the public MySQL server. Please refer to our mailing list archives for questions and example queries, or our Data Access FAQ for more information. References Sherry ST, Ward MH, Kholodov M, Baker J, Phan L, Smigielski EM, Sirotkin K. dbSNP: the NCBI database of genetic variation. Nucleic Acids Res. 2001 Jan 1;29(1):308-11. PMID: 11125122; PMC: PMC29783 
gold Assembly Assembly from Fragments Mapping and Sequencing Tracks Description This track shows the sequences used in the Dec. 2009 cow genome assembly. Genome assembly procedures are covered in the NCBI assembly documentation. NCBI also provides specific information about this assembly. The definition of this assembly is from the AGP file delivered with the sequence. The NCBI document AGP Specification describes the format of the AGP file. In dense mode, this track depicts the contigs that make up the currently viewed scaffold. Contig boundaries are distinguished by the use of alternating gold and brown coloration. Where gaps exist between contigs, spaces are shown between the gold and brown blocks. The relative order and orientation of the contigs within a scaffold is always known; therefore, a line is drawn in the graphical display to bridge the blocks. Component types found in this track (with counts of that type in parentheses): W - whole genome shotgun (75,632) F - one finished sequence (chrM/NC_006853.1) 
augustusGene AUGUSTUS AUGUSTUS ab initio gene predictions v3.1 Genes and Gene Prediction Tracks Description This track shows ab initio predictions from the program AUGUSTUS (version 3.1). The predictions are based on the genome sequence alone. For more information on the different gene tracks, see our Genes FAQ. Methods Statistical signal models were built for splice sites, branch-point patterns, translation start sites, and the poly-A signal. Furthermore, models were built for the sequence content of protein-coding and non-coding regions as well as for the length distributions of different exon and intron types. Detailed descriptions of most of these different models can be found in Mario Stanke's dissertation. This track shows the most likely gene structure according to a Semi-Markov Conditional Random Field model. Alternative splicing transcripts were obtained with a sampling algorithm (--alternatives-from-sampling=true --sample=100 --minexonintronprob=0.2 --minmeanexonintronprob=0.5 --maxtracks=3 --temperature=2). The different models used by Augustus were trained on a number of different species-specific gene sets, which included 1000-2000 training gene structures. The --species option allows one to choose the species used for training the models. Different training species were used for the --species option when generating these predictions for different groups of assemblies. Assembly Group Training Species Fish zebrafish Birds chicken Human and all other vertebrates human Nematodes caenorhabditis Drosophila fly A. mellifera honeybee1 A. gambiae culex S. cerevisiae saccharomyces This table describes which training species was used for a particular group of assemblies. When available, the closest related training species was used. Credits Thanks to the Stanke lab for providing the AUGUSTUS program. The training for the chicken version was done by Stefanie K&ouml;nig and the training for the human and zebrafish versions was done by Mario Stanke. References Stanke M, Diekhans M, Baertsch R, Haussler D. Using native and syntenically mapped cDNA alignments to improve de novo gene finding. Bioinformatics. 2008 Mar 1;24(5):637-44. PMID: 18218656 Stanke M, Waack S. Gene prediction with a hidden Markov model and a new intron submodel. Bioinformatics. 2003 Oct;19 Suppl 2:ii215-25. PMID: 14534192 
cytoBandIdeo Chromosome Band (Ideogram) Ideogram for Orientation Mapping and Sequencing Tracks 
est Cow ESTs Cow ESTs Including Unspliced mRNA and EST Tracks Description This track shows alignments between cow expressed sequence tags (ESTs) in GenBank and the genome. ESTs are single-read sequences, typically about 500 bases in length, that usually represent fragments of transcribed genes. Display Conventions and Configuration This track follows the display conventions for PSL alignment tracks. In dense display mode, the items that are more darkly shaded indicate matches of better quality. The strand information (+/-) indicates the direction of the match between the EST and the matching genomic sequence. It bears no relationship to the direction of transcription of the RNA with which it might be associated. The description page for this track has a filter that can be used to change the display mode, alter the color, and include/exclude a subset of items within the track. This may be helpful when many items are shown in the track display, especially when only some are relevant to the current task. To use the filter: Type a term in one or more of the text boxes to filter the EST display. For example, to apply the filter to all ESTs expressed in a specific organ, type the name of the organ in the tissue box. To view the list of valid terms for each text box, consult the table in the Table Browser that corresponds to the factor on which you wish to filter. For example, the &quot;tissue&quot; table contains all the types of tissues that can be entered into the tissue text box. Multiple terms may be entered at once, separated by a space. Wildcards may also be used in the filter. If filtering on more than one value, choose the desired combination logic. If &quot;and&quot; is selected, only ESTs that match all filter criteria will be highlighted. If &quot;or&quot; is selected, ESTs that match any one of the filter criteria will be highlighted. Choose the color or display characteristic that should be used to highlight or include/exclude the filtered items. If &quot;exclude&quot; is chosen, the browser will not display ESTs that match the filter criteria. If &quot;include&quot; is selected, the browser will display only those ESTs that match the filter criteria. This track may also be configured to display base labeling, a feature that allows the user to display all bases in the aligning sequence or only those that differ from the genomic sequence. For more information about this option, go to the Base Coloring for Alignment Tracks page. Several types of alignment gap may also be colored; for more information, go to the Alignment Insertion/Deletion Display Options page. Methods To make an EST, RNA is isolated from cells and reverse transcribed into cDNA. Typically, the cDNA is cloned into a plasmid vector and a read is taken from the 5' and/or 3' primer. For most &mdash; but not all &mdash; ESTs, the reverse transcription is primed by an oligo-dT, which hybridizes with the poly-A tail of mature mRNA. The reverse transcriptase may or may not make it to the 5' end of the mRNA, which may or may not be degraded. In general, the 3' ESTs mark the end of transcription reasonably well, but the 5' ESTs may end at any point within the transcript. Some of the newer cap-selected libraries cover transcription start reasonably well. Before the cap-selection techniques emerged, some projects used random rather than poly-A priming in an attempt to retrieve sequence distant from the 3' end. These projects were successful at this, but as a side effect also deposited sequences from unprocessed mRNA and perhaps even genomic sequences into the EST databases. Even outside of the random-primed projects, there is a degree of non-mRNA contamination. Because of this, a single unspliced EST should be viewed with considerable skepticism. To generate this track, cow ESTs from GenBank were aligned against the genome using blat. Note that the maximum intron length allowed by blat is 750,000 bases, which may eliminate some ESTs with very long introns that might otherwise align. When a single EST aligned in multiple places, the alignment having the highest base identity was identified. Only alignments having a base identity level within 0.5% of the best and at least 96% base identity with the genomic sequence were kept. Credits This track was produced at UCSC from EST sequence data submitted to the international public sequence databases by scientists worldwide. References Benson DA, Cavanaugh M, Clark K, Karsch-Mizrachi I, Lipman DJ, Ostell J, Sayers EW. GenBank. Nucleic Acids Res. 2013 Jan;41(Database issue):D36-42. PMID: 23193287; PMC: PMC3531190 Benson DA, Karsch-Mizrachi I, Lipman DJ, Ostell J, Wheeler DL. GenBank: update. Nucleic Acids Res. 2004 Jan 1;32(Database issue):D23-6. PMID: 14681350; PMC: PMC308779 Kent WJ. BLAT - the BLAST-like alignment tool. Genome Res. 2002 Apr;12(4):656-64. PMID: 11932250; PMC: PMC187518 
mrna Cow mRNAs Cow mRNAs from GenBank mRNA and EST Tracks Description The mRNA track shows alignments between cow mRNAs in GenBank and the genome. Display Conventions and Configuration This track follows the display conventions for PSL alignment tracks. In dense display mode, the items that are more darkly shaded indicate matches of better quality. The description page for this track has a filter that can be used to change the display mode, alter the color, and include/exclude a subset of items within the track. This may be helpful when many items are shown in the track display, especially when only some are relevant to the current task. To use the filter: Type a term in one or more of the text boxes to filter the mRNA display. For example, to apply the filter to all mRNAs expressed in a specific organ, type the name of the organ in the tissue box. To view the list of valid terms for each text box, consult the table in the Table Browser that corresponds to the factor on which you wish to filter. For example, the &quot;tissue&quot; table contains all the types of tissues that can be entered into the tissue text box. Multiple terms may be entered at once, separated by a space. Wildcards may also be used in the filter. If filtering on more than one value, choose the desired combination logic. If &quot;and&quot; is selected, only mRNAs that match all filter criteria will be highlighted. If &quot;or&quot; is selected, mRNAs that match any one of the filter criteria will be highlighted. Choose the color or display characteristic that should be used to highlight or include/exclude the filtered items. If &quot;exclude&quot; is chosen, the browser will not display mRNAs that match the filter criteria. If &quot;include&quot; is selected, the browser will display only those mRNAs that match the filter criteria. This track may also be configured to display codon coloring, a feature that allows the user to quickly compare mRNAs against the genomic sequence. For more information about this option, go to the Codon and Base Coloring for Alignment Tracks page. Several types of alignment gap may also be colored; for more information, go to the Alignment Insertion/Deletion Display Options page. Methods GenBank cow mRNAs were aligned against the genome using the blat program. When a single mRNA aligned in multiple places, the alignment having the highest base identity was found. Only alignments having a base identity level within 0.5% of the best and at least 96% base identity with the genomic sequence were kept. Credits The mRNA track was produced at UCSC from mRNA sequence data submitted to the international public sequence databases by scientists worldwide. References Benson DA, Cavanaugh M, Clark K, Karsch-Mizrachi I, Lipman DJ, Ostell J, Sayers EW. GenBank. Nucleic Acids Res. 2013 Jan;41(Database issue):D36-42. PMID: 23193287; PMC: PMC3531190 Benson DA, Karsch-Mizrachi I, Lipman DJ, Ostell J, Wheeler DL. GenBank: update. Nucleic Acids Res. 2004 Jan 1;32(Database issue):D23-6. PMID: 14681350; PMC: PMC308779 Kent WJ. BLAT - the BLAST-like alignment tool. Genome Res. 2002 Apr;12(4):656-64. PMID: 11932250; PMC: PMC187518 
gap Gap Gap Locations Mapping and Sequencing Tracks Description This track shows the gaps in the Dec. 2009 cow genome assembly. Genome assembly procedures are covered in the NCBI assembly documentation. NCBI also provides specific information about this assembly. The definition of the gaps in this assembly is from the AGP file delivered with the sequence. The NCBI document AGP Specification describes the format of the AGP file. Gaps are represented as black boxes in this track. If the relative order and orientation of the contigs on either side of the gap is supported by read pair data, it is a bridged gap and a white line is drawn through the black box representing the gap. This assembly contains the following principal types of gaps: contig - gaps between contigs in scaffolds (count: 3,193; all of size 100 bases) scaffold - gaps between scaffolds in chromosome assemblies (count: 69,261; size range: 1 - 1,074,158 bases) 
gc5BaseBw GC Percent GC Percent in 5-Base Windows Mapping and Sequencing Tracks Description The GC percent track shows the percentage of G (guanine) and C (cytosine) bases in 5-base windows. High GC content is typically associated with gene-rich areas. This track may be configured in a variety of ways to highlight different apsects of the displayed information. Click the &quot;Graph configuration help&quot; link for an explanation of the configuration options. Credits The data and presentation of this graph were prepared by Hiram Clawson. 
geneid Geneid Genes Geneid Gene Predictions Genes and Gene Prediction Tracks Description This track shows gene predictions from the geneid program developed by Roderic Guig&oacute;'s Computational Biology of RNA Processing group which is part of the Centre de Regulaci&oacute; Gen&ograve;mica (CRG) in Barcelona, Catalunya, Spain. Methods Geneid is a program to predict genes in anonymous genomic sequences designed with a hierarchical structure. In the first step, splice sites, start and stop codons are predicted and scored along the sequence using Position Weight Arrays (PWAs). Next, exons are built from the sites. Exons are scored as the sum of the scores of the defining sites, plus the the log-likelihood ratio of a Markov Model for coding DNA. Finally, from the set of predicted exons, the gene structure is assembled, maximizing the sum of the scores of the assembled exons. Credits Thanks to Computational Biology of RNA Processing for providing these data. References Blanco E, Parra G, Guig&#243; R. Using geneid to identify genes. Curr Protoc Bioinformatics. 2007 Jun;Chapter 4:Unit 4.3. PMID: 18428791 Parra G, Blanco E, Guig&#243; R. GeneID in Drosophila. Genome Res. 2000 Apr;10(4):511-5. PMID: 10779490; PMC: PMC310871 
genscan Genscan Genes Genscan Gene Predictions Genes and Gene Prediction Tracks Description This track shows predictions from the Genscan program written by Chris Burge. The predictions are based on transcriptional, translational and donor/acceptor splicing signals as well as the length and compositional distributions of exons, introns and intergenic regions. For more information on the different gene tracks, see our Genes FAQ. Display Conventions and Configuration This track follows the display conventions for gene prediction tracks. The track description page offers the following filter and configuration options: Color track by codons: Select the genomic codons option to color and label each codon in a zoomed-in display to facilitate validation and comparison of gene predictions. Go to the Coloring Gene Predictions and Annotations by Codon page for more information about this feature. Methods For a description of the Genscan program and the model that underlies it, refer to Burge and Karlin (1997) in the References section below. The splice site models used are described in more detail in Burge (1998) below. Credits Thanks to Chris Burge for providing the Genscan program. References Burge C. Modeling Dependencies in Pre-mRNA Splicing Signals. In: Salzberg S, Searls D, Kasif S, editors. Computational Methods in Molecular Biology. Amsterdam: Elsevier Science; 1998. p. 127-163. Burge C, Karlin S. Prediction of complete gene structures in human genomic DNA. J. Mol. Biol. 1997 Apr 25;268(1):78-94. PMID: 9149143 
ucscToINSDC INSDC Accession at INSDC - International Nucleotide Sequence Database Collaboration Mapping and Sequencing Tracks Description This track associates UCSC Genome Browser chromosome names to accession names from the International Nucleotide Sequence Database Collaboration (INSDC). The data were downloaded from the NCBI assembly database. Credits The data for this track was prepared by Hiram Clawson. 
nestedRepeats Interrupted Rpts Fragments of Interrupted Repeats Joined by RepeatMasker ID Variation and Repeats Description This track shows joined fragments of interrupted repeats extracted from the output of the RepeatMasker program which screens DNA sequences for interspersed repeats and low complexity DNA sequences using the Repbase Update library of repeats from the Genetic Information Research Institute (GIRI). Repbase Update is described in Jurka (2000) in the References section below. The detailed annotations from RepeatMasker are in the RepeatMasker track. This track shows fragments of original repeat insertions which have been interrupted by insertions of younger repeats or through local rearrangements. The fragments are joined using the ID column of RepeatMasker output. Display Conventions and Configuration In pack or full mode, each interrupted repeat is displayed as boxes (fragments) joined by horizontal lines, labeled with the repeat name. If all fragments are on the same strand, arrows are added to the horizontal line to indicate the strand. In dense or squish mode, labels and arrows are omitted and in dense mode, all items are collapsed to fit on a single row. Items are shaded according to the average identity score of their fragments. Usually, the shade of an item is similar to the shades of its fragments unless some fragments are much more diverged than others. The score displayed above is the average identity score, clipped to a range of 50% - 100% and then mapped to the range 0 - 1000 for shading in the browser. Methods UCSC has used the most current versions of the RepeatMasker software and repeat libraries available to generate these data. Note that these versions may be newer than those that are publicly available on the Internet. Data are generated using the RepeatMasker -s flag. Additional flags may be used for certain organisms. See the FAQ for more information. Credits Thanks to Arian Smit, Robert Hubley and GIRI for providing the tools and repeat libraries used to generate this track. References Smit AFA, Hubley R, Green P. RepeatMasker Open-3.0. http://www.repeatmasker.org. 1996-2010. Repbase Update is described in: Jurka J. Repbase Update: a database and an electronic journal of repetitive elements. Trends Genet. 2000 Sep;16(9):418-420. PMID: 10973072 For a discussion of repeats in mammalian genomes, see: Smit AF. Interspersed repeats and other mementos of transposable elements in mammalian genomes. Curr Opin Genet Dev. 1999 Dec;9(6):657-63. PMID: 10607616 Smit AF. The origin of interspersed repeats in the human genome. Curr Opin Genet Dev. 1996 Dec;6(6):743-8. PMID: 8994846 
microsat Microsatellite Microsatellites - Di-nucleotide and Tri-nucleotide Repeats Variation and Repeats Description This track displays regions that are likely to be useful as microsatellite markers. These are sequences of at least 15 perfect di-nucleotide and tri-nucleotide repeats and tend to be highly polymorphic in the population. Methods The data shown in this track are a subset of the Simple Repeats track, selecting only those repeats of period 2 and 3, with 100% identity and no indels and with at least 15 copies of the repeat. The Simple Repeats track is created using the Tandem Repeats Finder. For more information about this program, see Benson (1999). Credits Tandem Repeats Finder was written by Gary Benson. References Benson G. Tandem repeats finder: a program to analyze DNA sequences. Nucleic Acids Res. 1999 Jan 15;27(2):573-80. PMID: 9862982; PMC: PMC148217 
snp148Mult Mult. SNPs(148) Simple Nucleotide Polymorphisms (dbSNP 148) That Map to Multiple Genomic Loci Variation and Repeats Description This track contains information about a subset of the single nucleotide polymorphisms and small insertions and deletions (indels) &mdash; collectively Simple Nucleotide Polymorphisms &mdash; from dbSNP build 148, available from ftp.ncbi.nih.gov/snp. Only SNPs that have been mapped to multiple locations in the reference genome assembly are included in this subset. When a SNP's flanking sequences map to multiple locations in the reference genome, it calls into question whether there is true variation at those sites, or whether the sequences at those sites are merely highly similar but not identical. The default maximum weight for this track is 3, unlike the other dbSNP build 148 tracks which have a maximum weight of 1. That enables these multiply-mapped SNPs to appear in the display, while by default they will not appear in the All SNPs(148) track because of its maximum weight filter. Interpreting and Configuring the Graphical Display Variants are shown as single tick marks at most zoom levels. When viewing the track at or near base-level resolution, the displayed width of the SNP corresponds to the width of the variant in the reference sequence. Insertions are indicated by a single tick mark displayed between two nucleotides, single nucleotide polymorphisms are displayed as the width of a single base, and multiple nucleotide variants are represented by a block that spans two or more bases. On the track controls page, SNPs can be colored and/or filtered from the display according to several attributes: Class: Describes the observed alleles Single - single nucleotide variation: all observed alleles are single nucleotides (can have 2, 3 or 4 alleles) In-del - insertion/deletion Heterozygous - heterozygous (undetermined) variation: allele contains string '(heterozygous)' Microsatellite - the observed allele from dbSNP is a variation in counts of short tandem repeats Named - the observed allele from dbSNP is given as a text name instead of raw sequence, e.g., (Alu)/- No Variation - the submission reports an invariant region in the surveyed sequence Mixed - the cluster contains submissions from multiple classes Multiple Nucleotide Polymorphism (MNP) - the alleles are all of the same length, and length &gt; 1 Insertion - the polymorphism is an insertion relative to the reference assembly Deletion - the polymorphism is a deletion relative to the reference assembly Unknown - no classification provided by data contributor Validation: Method used to validate the variant (each variant may be validated by more than one method) By Frequency - at least one submitted SNP in cluster has frequency data submitted By Cluster - cluster has at least 2 submissions, with at least one submission assayed with a non-computational method Unknown - no validation has been reported for this variant Function: dbSNP's predicted functional effect of variant on RefSeq transcripts, both curated (NM_* and NR_*) as in the RefSeq Genes track and predicted (XM_* and XR_*), not shown in UCSC Genome Browser. A variant may have more than one functional role if it overlaps multiple transcripts. These terms and definitions are from the Sequence Ontology (SO); click on a term to view it in the MISO Sequence Ontology Browser. Unknown - no functional classification provided (possibly intergenic) synonymous_variant - A sequence variant where there is no resulting change to the encoded amino acid (dbSNP term: coding-synon) intron_variant - A transcript variant occurring within an intron (dbSNP term: intron) downstream_gene_variant - A sequence variant located 3' of a gene (dbSNP term: near-gene-3) upstream_gene_variant - A sequence variant located 5' of a gene (dbSNP term: near-gene-5) nc_transcript_variant - A transcript variant of a non coding RNA gene (dbSNP term: ncRNA) stop_gained - A sequence variant whereby at least one base of a codon is changed, resulting in a premature stop codon, leading to a shortened transcript (dbSNP term: nonsense) missense_variant - A sequence variant, where the change may be longer than 3 bases, and at least one base of a codon is changed resulting in a codon that encodes for a different amino acid (dbSNP term: missense) stop_lost - A sequence variant where at least one base of the terminator codon (stop) is changed, resulting in an elongated transcript (dbSNP term: stop-loss) frameshift_variant - A sequence variant which causes a disruption of the translational reading frame, because the number of nucleotides inserted or deleted is not a multiple of three (dbSNP term: frameshift) inframe_indel - A coding sequence variant where the change does not alter the frame of the transcript (dbSNP term: cds-indel) 3_prime_UTR_variant - A UTR variant of the 3' UTR (dbSNP term: untranslated-3) 5_prime_UTR_variant - A UTR variant of the 5' UTR (dbSNP term: untranslated-5) splice_acceptor_variant - A splice variant that changes the 2 base region at the 3' end of an intron (dbSNP term: splice-3) splice_donor_variant - A splice variant that changes the 2 base region at the 5' end of an intron (dbSNP term: splice-5) In the Coloring Options section of the track controls page, function terms are grouped into several categories, shown here with default colors: Locus: downstream_gene_variant, upstream_gene_variant Coding - Synonymous: synonymous_variant Coding - Non-Synonymous: stop_gained, missense_variant, stop_lost, frameshift_variant, inframe_indel Untranslated: 5_prime_UTR_variant, 3_prime_UTR_variant Intron: intron_variant Splice Site: splice_acceptor_variant, splice_donor_variant Molecule Type: Sample used to find this variant Genomic - variant discovered using a genomic template cDNA - variant discovered using a cDNA template Unknown - sample type not known Unusual Conditions (UCSC): UCSC checks for several anomalies that may indicate a problem with the mapping, and reports them in the Annotations section of the SNP details page if found: AlleleFreqSumNot1 - Allele frequencies do not sum to 1.0 (+-0.01). This SNP's allele frequency data are probably incomplete. DuplicateObserved, MixedObserved - Multiple distinct insertion SNPs have been mapped to this location, with either the same inserted sequence (Duplicate) or different inserted sequence (Mixed). FlankMismatchGenomeEqual, FlankMismatchGenomeLonger, FlankMismatchGenomeShorter - NCBI's alignment of the flanking sequences had at least one mismatch or gap near the mapped SNP position. (UCSC's re-alignment of flanking sequences to the genome may be informative.) MultipleAlignments - This SNP's flanking sequences align to more than one location in the reference assembly. NamedDeletionZeroSpan - A deletion (from the genome) was observed but the annotation spans 0 bases. (UCSC's re-alignment of flanking sequences to the genome may be informative.) NamedInsertionNonzeroSpan - An insertion (into the genome) was observed but the annotation spans more than 0 bases. (UCSC's re-alignment of flanking sequences to the genome may be informative.) NonIntegerChromCount - At least one allele frequency corresponds to a non-integer (+-0.010000) count of chromosomes on which the allele was observed. The reported total sample count for this SNP is probably incorrect. ObservedContainsIupac - At least one observed allele from dbSNP contains an IUPAC ambiguous base (e.g., R, Y, N). ObservedMismatch - UCSC reference allele does not match any observed allele from dbSNP. This is tested only for SNPs whose class is single, in-del, insertion, deletion, mnp or mixed. ObservedTooLong - Observed allele not given (length too long). ObservedWrongFormat - Observed allele(s) from dbSNP have unexpected format for the given class. RefAlleleMismatch - The reference allele from dbSNP does not match the UCSC reference allele, i.e., the bases in the mapped position range. RefAlleleRevComp - The reference allele from dbSNP matches the reverse complement of the UCSC reference allele. SingleClassLongerSpan - All observed alleles are single-base, but the annotation spans more than 1 base. (UCSC's re-alignment of flanking sequences to the genome may be informative.) SingleClassZeroSpan - All observed alleles are single-base, but the annotation spans 0 bases. (UCSC's re-alignment of flanking sequences to the genome may be informative.) Another condition, which does not necessarily imply any problem, is noted: SingleClassTriAllelic, SingleClassQuadAllelic - Class is single and three or four different bases have been observed (usually there are only two). Miscellaneous Attributes (dbSNP): several properties extracted from dbSNP's SNP_bitfield table (see dbSNP_BitField_v5.pdf for details) Clinically Associated (human only) - SNP is in OMIM and/or at least one submitter is a Locus-Specific Database. This does not necessarily imply that the variant causes any disease, only that it has been observed in clinical studies. Appears in OMIM/OMIA - SNP is mentioned in Online Mendelian Inheritance in Man for human SNPs, or Online Mendelian Inheritance in Animals for non-human animal SNPs. Some of these SNPs are quite common, others are known to cause disease; see OMIM/OMIA for more information. Has Microattribution/Third-Party Annotation - At least one of the SNP's submitters studied this SNP in a biomedical setting, but is not a Locus-Specific Database or OMIM/OMIA. Submitted by Locus-Specific Database - At least one of the SNP's submitters is associated with a database of variants associated with a particular gene. These variants may or may not be known to be causative. MAF &gt;= 5% in Some Population - Minor Allele Frequency is at least 5% in at least one population assayed. MAF &gt;= 5% in All Populations - Minor Allele Frequency is at least 5% in all populations assayed. Genotype Conflict - Quality check: different genotypes have been submitted for the same individual. Ref SNP Cluster has Non-overlapping Alleles - Quality check: this reference SNP was clustered from submitted SNPs with non-overlapping sets of observed alleles. Some Assembly's Allele Does Not Match Observed - Quality check: at least one assembly mapped by dbSNP has an allele at the mapped position that is not present in this SNP's observed alleles. Several other properties do not have coloring options, but do have some filtering options: Average heterozygosity: Calculated by dbSNP as described in Computation of Average Heterozygosity and Standard Error for dbSNP RefSNP Clusters. Average heterozygosity should not exceed 0.5 for bi-allelic single-base substitutions. Weight: Alignment quality assigned by dbSNP Weight can be 0, 1, 2, 3 or 10. Weight = 1 are the highest quality alignments. Weight = 0 and weight = 10 are excluded from the data set. A filter on maximum weight value is supported, which defaults to 1 on all tracks except the Mult. SNPs track, which defaults to 3. Submitter handles: These are short, single-word identifiers of labs or consortia that submitted SNPs that were clustered into this reference SNP by dbSNP (e.g., 1000GENOMES, ENSEMBL, KWOK). Some SNPs have been observed by many different submitters, and some by only a single submitter (although that single submitter may have tested a large number of samples). AlleleFrequencies: Some submissions to dbSNP include allele frequencies and the study's sample size (i.e., the number of distinct chromosomes, which is two times the number of individuals assayed, a.k.a. 2N). dbSNP combines all available frequencies and counts from submitted SNPs that are clustered together into a reference SNP. You can configure this track such that the details page displays the function and coding differences relative to particular gene sets. Choose the gene sets from the list on the SNP configuration page displayed beneath this heading: On details page, show function and coding differences relative to. When one or more gene tracks are selected, the SNP details page lists all genes that the SNP hits (or is close to), with the same keywords used in the function category. The function usually agrees with NCBI's function, except when NCBI's functional annotation is relative to an XM_* predicted RefSeq (not included in the UCSC Genome Browser's RefSeq Genes track) and/or UCSC's functional annotation is relative to a transcript that is not in RefSeq. Insertions/Deletions dbSNP uses a class called 'in-del'. We compare the length of the reference allele to the length(s) of observed alleles; if the reference allele is shorter than all other observed alleles, we change 'in-del' to 'insertion'. Likewise, if the reference allele is longer than all other observed alleles, we change 'in-del' to 'deletion'. UCSC Re-alignment of flanking sequences dbSNP determines the genomic locations of SNPs by aligning their flanking sequences to the genome. UCSC displays SNPs in the locations determined by dbSNP, but does not have access to the alignments on which dbSNP based its mappings. Instead, UCSC re-aligns the flanking sequences to the neighboring genomic sequence for display on SNP details pages. While the recomputed alignments may differ from dbSNP's alignments, they often are informative when UCSC has annotated an unusual condition. Non-repetitive genomic sequence is shown in upper case like the flanking sequence, and a &quot;|&quot; indicates each match between genomic and flanking bases. Repetitive genomic sequence (annotated by RepeatMasker and/or the Tandem Repeats Finder with period &gt;= 12) is shown in lower case, and matching bases are indicated by a &quot;+&quot;. Data Sources and Methods The data that comprise this track were extracted from database dump files and headers of fasta files downloaded from NCBI. The database dump files were downloaded from ftp://ftp.ncbi.nlm.nih.gov/snp/organisms/cow_9913/database/organism_data/ for bosTau8. The fasta files were downloaded from ftp://ftp.ncbi.nlm.nih.gov/snp/organisms/cow_9913/rs_fasta/ for bosTau8. Coordinates, orientation, location type and dbSNP reference allele data were obtained from b148_SNPContigLoc.bcp.gz and b148_ContigInfo.bcp.gz. b148_SNPMapInfo.bcp.gz provided the alignment weights. Functional classification was obtained from b148_SNPContigLocusId.bcp.gz. The internal database representation uses dbSNP's function terms, but for display in SNP details pages, these are translated into Sequence Ontology terms. Validation status and heterozygosity were obtained from SNP.bcp.gz. SNPAlleleFreq.bcp.gz and ../shared/Allele.bcp.gz provided allele frequencies. For the human assembly, allele frequencies were also taken from SNPAlleleFreq_TGP.bcp.gz . Submitter handles were extracted from Batch.bcp.gz, SubSNP.bcp.gz and SNPSubSNPLink.bcp.gz. SNP_bitfield.bcp.gz provided miscellaneous properties annotated by dbSNP, such as clinically-associated. See the document dbSNP_BitField_v5.pdf for details. The header lines in the rs_fasta files were used for molecule type, class and observed polymorphism. Data Access The raw data can be explored interactively with the Table Browser, Data Integrator, or Variant Annotation Integrator. For automated analysis, the genome annotation can be downloaded from the downloads server (snp148*.txt.gz) or the public MySQL server. Please refer to our mailing list archives for questions and example queries, or our Data Access FAQ for more information. References Sherry ST, Ward MH, Kholodov M, Baker J, Phan L, Smigielski EM, Sirotkin K. dbSNP: the NCBI database of genetic variation. Nucleic Acids Res. 2001 Jan 1;29(1):308-11. PMID: 11125122; PMC: PMC29783 
xenoRefGene Other RefSeq Non-Cow RefSeq Genes Genes and Gene Prediction Tracks Description This track shows known protein-coding and non-protein-coding genes for organisms other than cow, taken from the NCBI RNA reference sequences collection (RefSeq). The data underlying this track are updated weekly. Display Conventions and Configuration This track follows the display conventions for gene prediction tracks. The color shading indicates the level of review the RefSeq record has undergone: predicted (light), provisional (medium), reviewed (dark). The item labels and display colors of features within this track can be configured through the controls at the top of the track description page. Label: By default, items are labeled by gene name. Click the appropriate Label option to display the accession name instead of the gene name, show both the gene and accession names, or turn off the label completely. Codon coloring: This track contains an optional codon coloring feature that allows users to quickly validate and compare gene predictions. To display codon colors, select the genomic codons option from the Color track by codons pull-down menu. For more information about this feature, go to the Coloring Gene Predictions and Annotations by Codon page. Hide non-coding genes: By default, both the protein-coding and non-protein-coding genes are displayed. If you wish to see only the coding genes, click this box. Methods The RNAs were aligned against the cow genome using blat; those with an alignment of less than 15% were discarded. When a single RNA aligned in multiple places, the alignment having the highest base identity was identified. Only alignments having a base identity level within 0.5% of the best and at least 25% base identity with the genomic sequence were kept. Credits This track was produced at UCSC from RNA sequence data generated by scientists worldwide and curated by the NCBI RefSeq project. References Kent WJ. BLAT--the BLAST-like alignment tool. Genome Res. 2002 Apr;12(4):656-64. PMID: 11932250; PMC: PMC187518 Pruitt KD, Brown GR, Hiatt SM, Thibaud-Nissen F, Astashyn A, Ermolaeva O, Farrell CM, Hart J, Landrum MJ, McGarvey KM et al. RefSeq: an update on mammalian reference sequences. Nucleic Acids Res. 2014 Jan;42(Database issue):D756-63. PMID: 24259432; PMC: PMC3965018 Pruitt KD, Tatusova T, Maglott DR. NCBI Reference Sequence (RefSeq): a curated non-redundant sequence database of genomes, transcripts and proteins. Nucleic Acids Res. 2005 Jan 1;33(Database issue):D501-4. PMID: 15608248; PMC: PMC539979 
ucscToRefSeq RefSeq Acc RefSeq Accession Mapping and Sequencing Tracks Description This track associates UCSC Genome Browser chromosome names to accession identifiers from the NCBI Reference Sequence Database (RefSeq). The data were downloaded from the NCBI assembly database. Credits The data for this track was prepared by Hiram Clawson. 
sgpGene SGP Genes SGP Gene Predictions Using Cow/Human Homology Genes and Gene Prediction Tracks Description This track shows gene predictions from the SGP2 homology-based gene prediction program developed by Roderic Guig&oacute;'s &quot;Computational Biology of RNA Processing&quot; group, which is part of the Centre de Regulaci&oacute; Gen&ograve;mica (CRG) in Barcelona, Catalunya, Spain. To predict genes in a genomic query, SGP2 combines geneid predictions with tblastx comparisons of the genome of the target species against genomic sequences of other species (reference genomes) deemed to be at an appropriate evolutionary distance from the target. Credits Thanks to the &quot;Computational Biology of RNA Processing&quot; group for providing these data. 
simpleRepeat Simple Repeats Simple Tandem Repeats by TRF Variation and Repeats Description This track displays simple tandem repeats (possibly imperfect repeats) located by Tandem Repeats Finder (TRF) which is specialized for this purpose. These repeats can occur within coding regions of genes and may be quite polymorphic. Repeat expansions are sometimes associated with specific diseases. Methods For more information about the TRF program, see Benson (1999). Credits TRF was written by Gary Benson. References Benson G. Tandem repeats finder: a program to analyze DNA sequences. Nucleic Acids Res. 1999 Jan 15;27(2):573-80. PMID: 9862982; PMC: PMC148217 
intronEst Spliced ESTs Cow ESTs That Have Been Spliced mRNA and EST Tracks Description This track shows alignments between cow expressed sequence tags (ESTs) in GenBank and the genome that show signs of splicing when aligned against the genome. ESTs are single-read sequences, typically about 500 bases in length, that usually represent fragments of transcribed genes. To be considered spliced, an EST must show evidence of at least one canonical intron (i.e., the genomic sequence between EST alignment blocks must be at least 32 bases in length and have GT/AG ends). By requiring splicing, the level of contamination in the EST databases is drastically reduced at the expense of eliminating many genuine 3' ESTs. For a display of all ESTs (including unspliced), see the cow EST track. Display Conventions and Configuration This track follows the display conventions for PSL alignment tracks. In dense display mode, darker shading indicates a larger number of aligned ESTs. The strand information (+/-) indicates the direction of the match between the EST and the matching genomic sequence. It bears no relationship to the direction of transcription of the RNA with which it might be associated. The description page for this track has a filter that can be used to change the display mode, alter the color, and include/exclude a subset of items within the track. This may be helpful when many items are shown in the track display, especially when only some are relevant to the current task. To use the filter: Type a term in one or more of the text boxes to filter the EST display. For example, to apply the filter to all ESTs expressed in a specific organ, type the name of the organ in the tissue box. To view the list of valid terms for each text box, consult the table in the Table Browser that corresponds to the factor on which you wish to filter. For example, the &quot;tissue&quot; table contains all the types of tissues that can be entered into the tissue text box. Multiple terms may be entered at once, separated by a space. Wildcards may also be used in the filter. If filtering on more than one value, choose the desired combination logic. If &quot;and&quot; is selected, only ESTs that match all filter criteria will be highlighted. If &quot;or&quot; is selected, ESTs that match any one of the filter criteria will be highlighted. Choose the color or display characteristic that should be used to highlight or include/exclude the filtered items. If &quot;exclude&quot; is chosen, the browser will not display ESTs that match the filter criteria. If &quot;include&quot; is selected, the browser will display only those ESTs that match the filter criteria. This track may also be configured to display base labeling, a feature that allows the user to display all bases in the aligning sequence or only those that differ from the genomic sequence. For more information about this option, go to the Base Coloring for Alignment Tracks page. Several types of alignment gap may also be colored; for more information, go to the Alignment Insertion/Deletion Display Options page. Methods To make an EST, RNA is isolated from cells and reverse transcribed into cDNA. Typically, the cDNA is cloned into a plasmid vector and a read is taken from the 5' and/or 3' primer. For most &mdash; but not all &mdash; ESTs, the reverse transcription is primed by an oligo-dT, which hybridizes with the poly-A tail of mature mRNA. The reverse transcriptase may or may not make it to the 5' end of the mRNA, which may or may not be degraded. In general, the 3' ESTs mark the end of transcription reasonably well, but the 5' ESTs may end at any point within the transcript. Some of the newer cap-selected libraries cover transcription start reasonably well. Before the cap-selection techniques emerged, some projects used random rather than poly-A priming in an attempt to retrieve sequence distant from the 3' end. These projects were successful at this, but as a side effect also deposited sequences from unprocessed mRNA and perhaps even genomic sequences into the EST databases. Even outside of the random-primed projects, there is a degree of non-mRNA contamination. Because of this, a single unspliced EST should be viewed with considerable skepticism. To generate this track, cow ESTs from GenBank were aligned against the genome using blat. Note that the maximum intron length allowed by blat is 750,000 bases, which may eliminate some ESTs with very long introns that might otherwise align. When a single EST aligned in multiple places, the alignment having the highest base identity was identified. Only alignments having a base identity level within 0.5% of the best and at least 96% base identity with the genomic sequence are displayed in this track. Credits This track was produced at UCSC from EST sequence data submitted to the international public sequence databases by scientists worldwide. References Benson DA, Cavanaugh M, Clark K, Karsch-Mizrachi I, Lipman DJ, Ostell J, Sayers EW. GenBank. Nucleic Acids Res. 2013 Jan;41(Database issue):D36-42. PMID: 23193287; PMC: PMC3531190 Benson DA, Karsch-Mizrachi I, Lipman DJ, Ostell J, Wheeler DL. GenBank: update. Nucleic Acids Res. 2004 Jan 1;32(Database issue):D23-6. PMID: 14681350; PMC: PMC308779 Kent WJ. BLAT - the BLAST-like alignment tool. Genome Res. 2002 Apr;12(4):656-64. PMID: 11932250; PMC: PMC187518 
windowmaskerSdust WM + SDust Genomic Intervals Masked by WindowMasker + SDust Variation and Repeats Description This track depicts masked sequence as determined by WindowMasker. The WindowMasker tool is included in the NCBI C++ toolkit. The source code for the entire toolkit is available from the NCBI FTP site. Methods To create this track, WindowMasker was run with the following parameters: windowmasker -mk_counts true -input bosTau8.fa -output wm_counts windowmasker -ustat wm_counts -sdust true -input bosTau8.fa -output repeats.bed The repeats.bed (BED3) file was loaded into the &quot;windowmaskerSdust&quot; table for this track. References Morgulis A, Gertz EM, Sch&auml;ffer AA, Agarwala R. WindowMasker: window-based masker for sequenced genomes. Bioinformatics. 2006 Jan 15;22(2):134-41. PMID: 16287941 
chainNetRn6 Rat Chain/Net Rat (Jul. 2014 (RGSC 6.0/rn6)), Chain and Net Alignments Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of rat (Jul. 2014 (RGSC 6.0/rn6)) to the cow genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both rat and cow simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the rat assembly or an insertion in the cow assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the cow genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best rat/cow chain for every part of the cow genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The rat sequence used in this annotation is from the Jul. 2014 (RGSC 6.0/rn6) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the rat/cow split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single rat chromosome and a single cow chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetRn6Viewnet Net Rat (Jul. 2014 (RGSC 6.0/rn6)), Chain and Net Alignments Comparative Genomics 
netRn6 Rat Net Rat (Jul. 2014 (RGSC 6.0/rn6)) Alignment Net Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of rat (Jul. 2014 (RGSC 6.0/rn6)) to the cow genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both rat and cow simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the rat assembly or an insertion in the cow assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the cow genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best rat/cow chain for every part of the cow genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The rat sequence used in this annotation is from the Jul. 2014 (RGSC 6.0/rn6) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the rat/cow split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single rat chromosome and a single cow chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetRn6Viewchain Chain Rat (Jul. 2014 (RGSC 6.0/rn6)), Chain and Net Alignments Comparative Genomics 
chainRn6 Rat Chain Rat (Jul. 2014 (RGSC 6.0/rn6)) Chained Alignments Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of rat (Jul. 2014 (RGSC 6.0/rn6)) to the cow genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both rat and cow simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the rat assembly or an insertion in the cow assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the cow genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best rat/cow chain for every part of the cow genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The rat sequence used in this annotation is from the Jul. 2014 (RGSC 6.0/rn6) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the rat/cow split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single rat chromosome and a single cow chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetEquCab2 Horse Chain/Net Horse (Sep. 2007 (Broad/equCab2)), Chain and Net Alignments Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of horse (Sep. 2007 (Broad/equCab2)) to the cow genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both horse and cow simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the horse assembly or an insertion in the cow assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the cow genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best horse/cow chain for every part of the cow genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The horse sequence used in this annotation is from the Sep. 2007 (Broad/equCab2) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the horse/cow split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single horse chromosome and a single cow chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A88-111-31-128 C-111100-75-31 G-31-75100-111 T-128-31-11188 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetEquCab2Viewnet Net Horse (Sep. 2007 (Broad/equCab2)), Chain and Net Alignments Comparative Genomics 
netEquCab2 Horse Net Horse (Sep. 2007 (Broad/equCab2)) Alignment Net Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of horse (Sep. 2007 (Broad/equCab2)) to the cow genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both horse and cow simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the horse assembly or an insertion in the cow assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the cow genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best horse/cow chain for every part of the cow genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The horse sequence used in this annotation is from the Sep. 2007 (Broad/equCab2) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the horse/cow split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single horse chromosome and a single cow chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A88-111-31-128 C-111100-75-31 G-31-75100-111 T-128-31-11188 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetEquCab2Viewchain Chain Horse (Sep. 2007 (Broad/equCab2)), Chain and Net Alignments Comparative Genomics 
chainEquCab2 Horse Chain Horse (Sep. 2007 (Broad/equCab2)) Chained Alignments Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of horse (Sep. 2007 (Broad/equCab2)) to the cow genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both horse and cow simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the horse assembly or an insertion in the cow assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the cow genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best horse/cow chain for every part of the cow genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The horse sequence used in this annotation is from the Sep. 2007 (Broad/equCab2) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the horse/cow split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single horse chromosome and a single cow chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A88-111-31-128 C-111100-75-31 G-31-75100-111 T-128-31-11188 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetMm10 Mouse Chain/Net Mouse (Dec. 2011 (GRCm38/mm10)), Chain and Net Alignments Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of mouse (Dec. 2011 (GRCm38/mm10)) to the cow genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both mouse and cow simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the mouse assembly or an insertion in the cow assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the cow genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best mouse/cow chain for every part of the cow genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The mouse sequence used in this annotation is from the Dec. 2011 (GRCm38/mm10) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the mouse/cow split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single mouse chromosome and a single cow chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetMm10Viewnet Net Mouse (Dec. 2011 (GRCm38/mm10)), Chain and Net Alignments Comparative Genomics 
netMm10 Mouse Net Mouse (Dec. 2011 (GRCm38/mm10)) Alignment Net Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of mouse (Dec. 2011 (GRCm38/mm10)) to the cow genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both mouse and cow simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the mouse assembly or an insertion in the cow assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the cow genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best mouse/cow chain for every part of the cow genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The mouse sequence used in this annotation is from the Dec. 2011 (GRCm38/mm10) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the mouse/cow split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single mouse chromosome and a single cow chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetMm10Viewchain Chain Mouse (Dec. 2011 (GRCm38/mm10)), Chain and Net Alignments Comparative Genomics 
chainMm10 Mouse Chain Mouse (Dec. 2011 (GRCm38/mm10)) Chained Alignments Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of mouse (Dec. 2011 (GRCm38/mm10)) to the cow genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both mouse and cow simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the mouse assembly or an insertion in the cow assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the cow genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best mouse/cow chain for every part of the cow genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The mouse sequence used in this annotation is from the Dec. 2011 (GRCm38/mm10) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the mouse/cow split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single mouse chromosome and a single cow chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetHg38 Human Chain/Net Human (Dec. 2013 (GRCh38/hg38)), Chain and Net Alignments Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of human (Dec. 2013 (GRCh38/hg38)) to the cow genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both human and cow simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the human assembly or an insertion in the cow assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the cow genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best human/cow chain for every part of the cow genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The human sequence used in this annotation is from the Dec. 2013 (GRCh38/hg38) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the human/cow split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single human chromosome and a single cow chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetHg38Viewnet Net Human (Dec. 2013 (GRCh38/hg38)), Chain and Net Alignments Comparative Genomics 
netHg38 Human Net Human (Dec. 2013 (GRCh38/hg38)) Alignment net Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of human (Dec. 2013 (GRCh38/hg38)) to the cow genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both human and cow simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the human assembly or an insertion in the cow assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the cow genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best human/cow chain for every part of the cow genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The human sequence used in this annotation is from the Dec. 2013 (GRCh38/hg38) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the human/cow split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single human chromosome and a single cow chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetHg38Viewchain Chain Human (Dec. 2013 (GRCh38/hg38)), Chain and Net Alignments Comparative Genomics 
chainHg38 Human Chain Human (Dec. 2013 (GRCh38/hg38)) Chained Alignments Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of human (Dec. 2013 (GRCh38/hg38)) to the cow genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both human and cow simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the human assembly or an insertion in the cow assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the cow genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best human/cow chain for every part of the cow genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The human sequence used in this annotation is from the Dec. 2013 (GRCh38/hg38) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the human/cow split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single human chromosome and a single cow chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961